|
100
|
How do I enable the cross link support ( rectangular )
With AxSurface1
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",0,76)
With .Add("Element <sha ;;0>C",-76,32)
.AutoSize = False
.Height = 32
End With
With .Add("Element <sha ;;0>D",76,32)
.AutoSize = False
.Height = 32
End With
End With
With .Links
With .Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
.StartPos = EXSURFACELib.AlignmentEnum.CenterAlignment
.EndPos = EXSURFACELib.AlignmentEnum.CenterAlignment
End With
With .Add(AxSurface1.Elements.Item(2),AxSurface1.Elements.Item(1))
.StartPos = EXSURFACELib.AlignmentEnum.CenterAlignment
.EndPos = EXSURFACELib.AlignmentEnum.CenterAlignment
End With
.Add(AxSurface1.Elements.Item(3),AxSurface1.Elements.Item(4))
With .Add(AxSurface1.Elements.Item(4),AxSurface1.Elements.Item(3))
.StartPos = EXSURFACELib.AlignmentEnum.LeftAlignment
.EndPos = EXSURFACELib.AlignmentEnum.RightAlignment
End With
End With
.ShowLinks = EXSURFACELib.ShowExtendedLinksEnum.exShowCrossLinksRect Or EXSURFACELib.ShowExtendedLinksEnum.exShowExtendedLinks
End With
|
|
99
|
How do I show a link frmo bottom to top, or reverse, not from left to right
With AxSurface1
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",0,64)
End With
With .Links
With .Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
.StartPos = EXSURFACELib.AlignmentEnum.CenterAlignment
.EndPos = EXSURFACELib.AlignmentEnum.CenterAlignment
End With
End With
End With
|
|
98
|
What options to align the elements do I have if I use Arrange method
Dim h1,h2,h3
With AxSurface1
.BeginUpdate()
.ShowGridLines = True
With .Elements
h1 = .Add("Top Alignment").ID
.Add("Element")
.Add("Element")
.Add("Element")
h2 = .Add("Center Alignment",Nothing,96).ID
.Add("Element",Nothing,96)
.Add("Element",Nothing,96)
.Add("Element",Nothing,96)
h3 = .Add("Bottom Alignment",Nothing,178).ID
.Add("Element",Nothing,192)
.Add("Element",Nothing,192)
.Add("Element",Nothing,192)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(3))
.Add(AxSurface1.Elements.Item(2),AxSurface1.Elements.Item(4))
.Add(AxSurface1.Elements.Item(2),AxSurface1.Elements.Item(3))
.Add(AxSurface1.Elements.Item(5),AxSurface1.Elements.Item(6))
.Add(AxSurface1.Elements.Item(5),AxSurface1.Elements.Item(7))
.Add(AxSurface1.Elements.Item(6),AxSurface1.Elements.Item(8))
.Add(AxSurface1.Elements.Item(6),AxSurface1.Elements.Item(7))
.Add(AxSurface1.Elements.Item(9),AxSurface1.Elements.Item(10))
.Add(AxSurface1.Elements.Item(9),AxSurface1.Elements.Item(11))
.Add(AxSurface1.Elements.Item(10),AxSurface1.Elements.Item(12))
.Add(AxSurface1.Elements.Item(10),AxSurface1.Elements.Item(11))
End With
.set_DefArrange(EXSURFACELib.DefArrangeEnum.exDefArrangeAlign,0)
.Arrange(h1)
.set_DefArrange(EXSURFACELib.DefArrangeEnum.exDefArrangeAlign,1)
.Arrange(h2)
.set_DefArrange(EXSURFACELib.DefArrangeEnum.exDefArrangeAlign,2)
.Arrange(h3)
.EndUpdate()
End With
|
|
97
|
Is there an auto-arrange feature that will display the flow-chart centered and zoomed correctly after we are finished building it
With AxSurface1
With .Elements
.Add("Element A").ID = "A"
.Add("Element B").ID = "B"
.Add("Element C").ID = "C"
.Add("Element D").ID = "D"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B"))
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("C"))
.Add(AxSurface1.Elements.Item("B"),AxSurface1.Elements.Item("D"))
.Add(AxSurface1.Elements.Item("B"),AxSurface1.Elements.Item("C"))
End With
.Arrange()
End With
|
|
96
|
Is it possible to change the distance between elements, when calling the Arrange method
With AxSurface1
With .Elements
.Add("Element A").ID = "A"
.Add("Element B").ID = "B"
.Add("Element C").ID = "C"
.Add("Element D").ID = "D"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B"))
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("C"))
.Add(AxSurface1.Elements.Item("B"),AxSurface1.Elements.Item("D"))
.Add(AxSurface1.Elements.Item("B"),AxSurface1.Elements.Item("C"))
End With
.set_DefArrange(EXSURFACELib.DefArrangeEnum.exDefArrangeDX,0)
.set_DefArrange(EXSURFACELib.DefArrangeEnum.exDefArrangeDY,0)
.Arrange()
End With
|
|
95
|
How do I organize vertically the elements
With AxSurface1
With .Elements
.Add("Element A").ID = "A"
.Add("Element B").ID = "B"
.Add("Element C").ID = "C"
.Add("Element D").ID = "D"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B"))
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("C"))
.Add(AxSurface1.Elements.Item("B"),AxSurface1.Elements.Item("D"))
.Add(AxSurface1.Elements.Item("B"),AxSurface1.Elements.Item("C"))
End With
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight
.set_DefArrange(EXSURFACELib.DefArrangeEnum.exDefArrangeDir,1)
.Arrange()
End With
|
|
94
|
Is there a way to create a link which has the same start and end element
With AxSurface1
With .Elements
.Add("Element")
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(1))
End With
End With
|
|
93
|
How can I prevent hiding the item when an item with an outgoing link, is collapsed
With AxSurface1
With .Elements
.Add("Item <sha ;;0>1").ID = 1
.Insert("Item <sha ;;0>2",1).ID = 2
With .Add("Item <sha ;;0>3")
.ID = 3
.X = 96
.Y = 23
End With
End With
With .Links
.Add(AxSurface1.Elements.Item(2),AxSurface1.Elements.Item(3))
End With
.ShowLinksOnCollapse = True
End With
|
|
92
|
How can I change the toolbar's visual appearance
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarAppearance,16777216)
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarBackColor,16777215)
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarForeColor,2631720)
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarButtonDownBackColor,23093344)
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarButtonDownForeColor,15790320)
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarButtonHotBackColor,27304096)
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarButtonHotForeColor,16777215)
End With
|
|
91
|
How can I change the toolbar's background color
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exToolBarBackColor,16777215)
End With
|
|
90
|
How can I fit or ensure that all elements are in the control's client area
With AxSurface1
With .Elements
.Add("Element A",-500,-500).BackColor = RGB(0,255,0)
.Add("Element B",500,500).BackColor = RGB(255,0,0)
.Add("Element C",48,24)
End With
.FitToClient()
End With
|
|
89
|
When I use the context menu to insert an image, the size seems to be fixed to 32 pixels. How can I control / change this
' CreateElement event - The user creates at runtime a new element.
Private Sub AxSurface1_CreateElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_CreateElementEvent) Handles AxSurface1.CreateElement
' Element.Edit(0,"multiline,wordwrap")
' Element.AutoSize = True
With AxSurface1
Debug.Print( "Call Edit(0) method of the Element object" )
End With
End Sub
' RClick event - Occurs once the user right clicks the control.
Private Sub AxSurface1_RClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AxSurface1.RClick
' SelElement(0).Edit(0,"multiline,wordwrap")
With AxSurface1
.Selection = .get_ElementFromPoint(-1,-1)
Debug.Print( "Call Edit(0) method of the SelElement(0) property" )
End With
End Sub
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.VisualAppearance.Add(3,"c:\exontrol\images\hot.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuAppearance,16777216)
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuSelBackColor,33349056)
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBorderColor,50331648)
.SelectObjectColor = RGB(192,221,252)
.set_HTMLPicture("pic1","c:\exontrol\images\zipdisk.gif")
.set_HTMLPicture("pic2","c:\exontrol\images\auction.gif")
.set_HTMLPicture("pic3","c:\exontrol\images\colorize.gif")
With .Elements
.Add("Element A").ID = "A"
With .Add("Custom-size pictures:<br><img>pic1:24</img>,<img>pic2:48</img> ,... and so on.",96,48)
.ID = "B"
.CaptionSingleLine = EXSURFACELib.CaptionSingleLineEnum.exCaptionWordWrap
End With
.Add("Element C",48,24)
End With
.EditContextMenuItems = "Size[id=57680][edittype=515][border=0][min=16][max=128][freq=16][editwidth=-128][ticklabel=value = %i ? '<b>'+value : ( value =" & _
" vmax ? '<fgcolor 808080><font ;6><b>'+value : ( value = vmin ? '<fgcolor 808080><font ;6><b>'+value : '' ) )],Insert[group=3](<" & _
"img>pic1:32</img>[id=57763],<img>pic2:32</img>[id=57763],Others[id=1000](default[group=3](<img>pic3</img>[id=57763]),<font ;6>ot" & _
"her sizes[sep],<img>pic3:16</img>[id=57763],<img>pic3:32</img>[id=57763],<img>pic3:64</img>[id=57763]))"
End With
|
|
88
|
Can I add images to node while editing the node using the Edit method
' CreateElement event - The user creates at runtime a new element.
Private Sub AxSurface1_CreateElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_CreateElementEvent) Handles AxSurface1.CreateElement
' Element.Edit(0,"multiline,wordwrap")
' Element.AutoSize = True
With AxSurface1
Debug.Print( "Call Edit(0) method of the Element object" )
End With
End Sub
' RClick event - Occurs once the user right clicks the control.
Private Sub AxSurface1_RClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AxSurface1.RClick
' SelElement(0).Edit(0,"multiline,wordwrap")
With AxSurface1
.Selection = .get_ElementFromPoint(-1,-1)
Debug.Print( "Call Edit(0) method of the SelElement(0) property" )
End With
End Sub
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuAppearance,16777216)
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuSelBackColor,16777471)
.SelectObjectStyle = EXSURFACELib.LinesStyleEnum.exNoLines
.SelectObjectColor = RGB(192,221,252)
.set_HTMLPicture("pic1","c:\exontrol\images\zipdisk.gif")
.set_HTMLPicture("pic2","c:\exontrol\images\auction.gif")
.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
With .Elements
.Add("Element A").ID = "A"
With .Add("This is a node that displays pictures:<br><img>pic1:48</img>,<img>pic2:48</img> ,... and so on.",96,48)
.ID = "B"
.CaptionSingleLine = EXSURFACELib.CaptionSingleLineEnum.exCaptionWordWrap
End With
.Add("Element C",48,24).BackColor = RGB(255,255,255)
End With
End With
|
|
87
|
I am using the Edit method to edit the node, but still not able to display multiple lines. Is this possible
' CreateElement event - The user creates at runtime a new element.
Private Sub AxSurface1_CreateElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_CreateElementEvent) Handles AxSurface1.CreateElement
' Element.Edit(0,"multiline,wordwrap")
' Element.AutoSize = True
With AxSurface1
Debug.Print( "Call Edit(0) method of the Element object" )
End With
End Sub
' RClick event - Occurs once the user right clicks the control.
Private Sub AxSurface1_RClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AxSurface1.RClick
' SelElement(0).Edit(0,"multiline,wordwrap")
With AxSurface1
.Selection = .get_ElementFromPoint(-1,-1)
Debug.Print( "Call Edit(0) method of the SelElement(0) property" )
End With
End Sub
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuAppearance,16777216)
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuSelBackColor,16777471)
.SelectObjectStyle = EXSURFACELib.LinesStyleEnum.exNoLines
.SelectObjectColor = RGB(192,221,252)
With .Elements
.Add("Element A").ID = "A"
With .Add("Right-<b>Click</b> the node to edit it.",96,48)
.ID = "B"
.CaptionSingleLine = EXSURFACELib.CaptionSingleLineEnum.exCaptionWordWrap
End With
.Add("Element C",48,24).BackColor = RGB(255,255,255)
End With
End With
|
|
86
|
How can I change the visual appearance of the edit's context menu
' CreateElement event - The user creates at runtime a new element.
Private Sub AxSurface1_CreateElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_CreateElementEvent) Handles AxSurface1.CreateElement
' Element.Edit(0)
' Element.AutoSize = True
With AxSurface1
Debug.Print( "Call Edit(0) method of the Element object" )
End With
End Sub
' RClick event - Occurs once the user right clicks the control.
Private Sub AxSurface1_RClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AxSurface1.RClick
' SelElement(0).Edit(0)
With AxSurface1
.Selection = .get_ElementFromPoint(-1,-1)
Debug.Print( "Call Edit(0) method of the SelElement(0) property" )
End With
End Sub
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuAppearance,16777216)
.set_Background(EXSURFACELib.BackgroundPartEnum.exContextMenuSelBackColor,16777471)
.SelectObjectStyle = EXSURFACELib.LinesStyleEnum.exNoLines
.SelectObjectColor = RGB(192,221,252)
With .Elements
.Add("Element A").ID = "A"
.Add("Right-Click to edit this node",96,48).ID = "B"
.Add("Element C",48,24).BackColor = RGB(255,255,255)
End With
End With
|
|
85
|
How can I edit the node once the user right-click the element
' CreateElement event - The user creates at runtime a new element.
Private Sub AxSurface1_CreateElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_CreateElementEvent) Handles AxSurface1.CreateElement
' Element.Edit(0)
' Element.AutoSize = True
With AxSurface1
Debug.Print( "Call Edit(0) method of the Element object" )
End With
End Sub
' RClick event - Occurs once the user right clicks the control.
Private Sub AxSurface1_RClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AxSurface1.RClick
' SelElement(0).Edit(0)
With AxSurface1
.Selection = .get_ElementFromPoint(-1,-1)
Debug.Print( "Call Edit(0) method of the SelElement(0) property" )
End With
End Sub
With AxSurface1
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,48).ID = "B"
.Add("Element C",48,24).BackColor = RGB(255,255,255)
End With
End With
|
|
84
|
I wish to return the name that is displayed in the Element that I have selected
' SelectionChanged event - Notifies your application that the control's selection has been changed.
Private Sub AxSurface1_SelectionChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AxSurface1.SelectionChanged
With AxSurface1
Debug.Print( "The number of selected elements is: " )
Debug.Print( .SelCount )
Debug.Print( .get_SelElement(0).Caption )
End With
End Sub
With AxSurface1
.HideSel = False
.SelectObjectColorInactive = .SelectObjectColor
.SelectObjectTextColorInactive = .SelectObjectTextColor
With .Elements
.Add("Element 1").Selected = True
With .Add("Element 2")
.X = 32
.Y = 32
End With
End With
End With
|
|
83
|
Been playing with the surface control with the embedded ExGrid ActiveX...I can see most events coming through via the Surface control but I can't get the OnOLEStartDrag event to fire
' OleEvent event - Occurs once an inside control fires an event.
Private Sub AxSurface1_OleEvent(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_OleEventEvent) Handles AxSurface1.OleEvent
' Ev.Param(1).Value = 2
' Ev.Param(0).Value.SetData("items to be carried")
With AxSurface1
Debug.Print( e.ev )
End With
End Sub
With AxSurface1
.BeginUpdate()
With .Elements
With .InsertControl("Exontrol.Grid")
.ElementFormat = """client"""
With .Object
.BeginUpdate()
.OLEDropMode = 1
.Columns.Add("Default")
.Items.AddItem("Click the item so it gets the focus")
.EndUpdate()
End With
End With
End With
.MoveCorner(EXSURFACELib.ContentAlignmentEnum.exMiddleCenter,EXSURFACELib.ContentAlignmentEnum.exTopLeft)
.EndUpdate()
End With
|
|
82
|
Is it possible to assign/add a percent to
an element
With AxSurface1
With .Elements
With .Add("Element A")
.ID = "A"
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopCenter
.AutoSize = False
.Height = 36
.Width = 96
.MinHeight = 36
.BackgroundExt = "none[(2,100%-15,100%-4,14)](left[50%,back=RGB(0,255,0),text=`15%`,align=0x11,pattern=6,frame])"
.BackgroundExtValue(EXSURFACELib.IndexExtEnum.exIndexExt2,EXSURFACELib.BackgroundExtPropertyEnum.exClientExt) = "75%"
.BackgroundExtValue(EXSURFACELib.IndexExtEnum.exIndexExt2,EXSURFACELib.BackgroundExtPropertyEnum.exTextExt) = .BackgroundExtValue(EXSURFACELib.IndexExtEnum.exIndexExt2,EXSURFACELib.BackgroundExtPropertyEnum.exClientExt)
End With
End With
End With
|
|
81
|
How can I disable selecting the nodes/elements
With AxSurface1
.AllowSelectObject = EXSURFACELib.AllowKeysEnum.exDisallow
.AllowSelectNothing = False
.AllowSelectObjectRect = EXSURFACELib.AllowKeysEnum.exDisallow
.AllowToggleSelectKey = EXSURFACELib.AllowKeysEnum.exDisallow
End With
|
|
80
|
How can I set my zooming levels on the control's toolbar
With AxSurface1
.ZoomLevels = "75,100,150,200"
.AllowLinkObjects = EXSURFACELib.AllowKeysEnum.exDisallow
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",48,12).BackColor = RGB(255,255,255)
End With
End With
|
|
79
|
How can I prevent zooming the surface
With AxSurface1
.AllowZoomSurface = EXSURFACELib.AllowKeysEnum.exDisallow
.AllowZoomWheelSurface = False
.ToolBarFormat = "-1,100"
End With
|
|
78
|
How can I prevent adding the links
With AxSurface1
.AllowLinkObjects = EXSURFACELib.AllowKeysEnum.exDisallow
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",48,12).BackColor = RGB(255,255,255)
End With
End With
|
|
77
|
How can I fix all elements on the surface, so no moving or resizing is allowed
With AxSurface1
.AllowResizeObject = EXSURFACELib.AllowKeysEnum.exDisallow
.AllowMoveObject = EXSURFACELib.AllowKeysEnum.exDisallow
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",48,12).BackColor = RGB(255,255,255)
End With
End With
|
|
76
|
How can I link elements with no pressing the SHIFT key
With AxSurface1
.AllowInsertObject = False
.AllowLinkObjects = EXSURFACELib.AllowKeysEnum.exLeftClick
.AllowMoveObject = EXSURFACELib.AllowKeysEnum.exDisallow
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",48,12).BackColor = RGB(255,255,255)
End With
End With
|
|
75
|
How can I disable creating the tree/hierarchies
With AxSurface1
.AllowInsertObject = False
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",48,12).BackColor = RGB(255,255,255)
End With
End With
|
|
74
|
How can I create new elements using simple clicks rather than double clicks
With AxSurface1
.AllowCreateObject = EXSURFACELib.AllowKeysEnum.exLeftClick
End With
|
|
73
|
How can I disable creating new elements at runtime
With AxSurface1
.AllowCreateObject = EXSURFACELib.AllowKeysEnum.exDisallow
End With
|
|
72
|
I've noticed that the links cut the elements. Is it possible to show the links on the back
With AxSurface1
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight
.ShowLinks = EXSURFACELib.ShowExtendedLinksEnum.exShowExtendedLinks
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",48,12).BackColor = RGB(255,255,255)
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B")).Caption = "link"
End With
End With
|
|
71
|
How can I show a picture on the link
With AxSurface1
.set_HTMLPicture("pic1","c:\exontrol\images\zipdisk.gif")
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B")).Caption = "<img>pic1:24</img>"
End With
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight
End With
|
|
70
|
How can I show a caption on the link
With AxSurface1
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B")).Caption = "link"
End With
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight
End With
|
|
69
|
I am using EBN to show my arrows, the question is if I can make it bigger/larger
With AxSurface1
With .VisualAppearance
.Add(1,"c:\exontrol\images\normal.ebn")
.Add(2,"CP:1 -2 -2 2 2")
End With
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",96,-24).ID = "C"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B"))
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("C"))
End With
.GetOcx().LinksArrowColor = &H2000000
End With
|
|
68
|
Is it possible to show different type of arrows for links
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
With .Elements
.Add("Element A").ID = "A"
.Add("Element B",96,24).ID = "B"
.Add("Element C",96,-24).ID = "C"
End With
With .Links
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("B")).ArrowColor = RGB(255,0,0)
.Add(AxSurface1.Elements.Item("A"),AxSurface1.Elements.Item("C")).ArrowColor = &H1000000
End With
End With
|
|
67
|
How can I remove or clear the entire surface
With AxSurface1
.Elements.Add("element")
.Elements.Clear()
.Home()
End With
|
|
66
|
How can I programmatically add a child element, or create a tree/hierarchy
With AxSurface1
With .Elements
.Add("Root").ID = "rootID"
.Insert("Child 1","rootID")
.Insert("Child 2","rootID").ID = "childID"
.Insert("Child 3","rootID")
.Insert("Sub-Child 1.2","childID")
.Insert("Sub-Child 2.2","childID")
End With
End With
|
|
65
|
I've noticed that the element's background is transparent. Can I make it opaque
With AxSurface1
With .Elements
.Add("new 1").BackColor = RGB(255,255,255)
.Add("new 1",24,24).BackColor = RGB(240,240,240)
End With
End With
|
|
64
|
How can I add a resizable element
With AxSurface1
With .Elements
With .Add("new 1")
.AutoSize = False
.Resizable = True
End With
With .Add("new 1",24,24)
.AutoSize = False
.Resizable = True
End With
End With
End With
|
|
63
|
How can I programmatically add a new element
With AxSurface1
With .Elements
.Add("new 1")
.Add("new 1",24,24)
End With
End With
|
|
62
|
Is it possible to assign a tooltip to an element
With AxSurface1
.Elements.Add("Element with a Tooltip").ToolTip = "This is a bit of text that should be displayed when cursor hovers the element."
End With
|
|
61
|
How do I specify direct/straight link for all links
With AxSurface1
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight Or EXSURFACELib.ShowLinkTypeEnum.exLinkDirect
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
End With
End With
|
|
60
|
How do I show a direct/straight link
With AxSurface1
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2)).ShowLinkType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight Or EXSURFACELib.ShowLinkTypeEnum.exLinkDirect
End With
End With
|
|
59
|
How can I ensure that a specified element fits the surface's visible area
With AxSurface1
With .Elements
With .Add("Element A",-100).Pattern
.Type = EXSURFACELib.PatternEnum.exPatternBDiagonal
.Color = RGB(224,224,224)
End With
.Add("Element B",2000).ScrollTo(EXSURFACELib.ContentAlignmentEnum.exMiddleCenter)
End With
End With
|
|
58
|
Is it possible to show a pattern like ( not available ) over an element
With AxSurface1
With .Elements
With .Add("Element+Pattern",-100).Pattern
.Type = EXSURFACELib.PatternEnum.exPatternBDiagonal
.Color = RGB(224,224,224)
End With
.Add("Element",100)
End With
End With
|
|
57
|
How can I specify a different overview color for the element
With AxSurface1
With .Elements
.Add("Element+A",-100).OverviewColor = RGB(255,0,0)
.Add("Element+B",100)
End With
.set_ScrollPos(True,512)
End With
|
|
56
|
I've noticed that some lines are shown on the border, how can I get ride of them
With AxSurface1
With .Elements
.Add("Element+A",-100)
.Add("Element+B",100)
End With
.set_ScrollPos(True,512)
.GetOcx().OverviewColor = -1
End With
|
|
55
|
How can I handle clicking an icon or a picture
' HandCursorClick event - The uses clicks a part of the element that shows the had cursor.
Private Sub AxSurface1_HandCursorClick(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_HandCursorClickEvent) Handles AxSurface1.HandCursorClick
With AxSurface1
Debug.Print( e.key )
End With
End Sub
With AxSurface1
.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
.set_HTMLPicture("pic1","c:\exontrol\images\zipdisk.gif")
.set_HTMLPicture("pic2","c:\exontrol\images\auction.gif")
With .Elements.Add("Caption")
.Pictures = "1,2/pic1/pic2"
.PicturesAlign = EXSURFACELib.ContentAlignmentEnum.exBottomCenter
.ShowHandCursorOn = EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorExtraPictures Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorPictures Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorIcon Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorPicture
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopCenter
End With
End With
|
|
54
|
How can I display a picture
With AxSurface1
.set_HTMLPicture("pic1","c:\exontrol\images\zipdisk.gif")
.set_HTMLPicture("pic2","c:\exontrol\images\auction.gif")
.Elements.Add("Element").Pictures = "pic1/pic2"
End With
|
|
53
|
How can I display a picture
With AxSurface1
.set_HTMLPicture("pic1","c:\exontrol\images\zipdisk.gif")
.set_HTMLPicture("pic2","c:\exontrol\images\auction.gif")
.Elements.Add("Icon <img>pic1</img> or <img>pic2</img>")
End With
|
|
52
|
How can I display an icon
With AxSurface1
.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
.Elements.Add("Element").Pictures = "0/1,2"
End With
|
|
51
|
How can I display an icon
With AxSurface1
.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
.Elements.Add("Icon <img>1</img> or <img>2</img>")
End With
|
|
50
|
How can I prevent moving all descendent/outgoing elements when focused element is moved, more like a free move
With AxSurface1
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
End With
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight Or EXSURFACELib.ShowLinkTypeEnum.exLinkDirect
.AllowMoveDescendents = False
End With
|
|
49
|
How can I display the +/- expand/collapse glyphs next to linked elements
With AxSurface1
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
End With
.Elements.Item(1).Expanded = False
.ExpandLinkedElements = True
End With
|
|
48
|
How can I host the Exontrol.Button inside the surface
With AxSurface1
With .Elements
With .Add("ActiveX")
.Type = EXSURFACELib.ElementHostTypeEnum.exElementHostControl
.ElementFormat = """check"":18,""client"""
.ShowCheckBox = True
.Control = "Exontrol.Button"
.Object.Caption = "<sha ;;0>button"
.Height = 32
.Width = 128
End With
End With
End With
|
|
47
|
How can I host a Command button
With AxSurface1
With .Elements
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = """check"":18,""client"""
.Object.Caption = "command"
.ShowCheckBox = True
.Height = 48
.Width = 128
End With
End With
End With
|
|
46
|
How can I handle the events of the inner ActiveX control
' OleEvent event - Occurs once an inside control fires an event.
Private Sub AxSurface1_OleEvent(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_OleEventEvent) Handles AxSurface1.OleEvent
With AxSurface1
Debug.Print( e.ev )
End With
End Sub
With AxSurface1
With .Elements
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = """check"":18,""client"""
.Object.Caption = "command"
.ShowCheckBox = True
.Height = 48
.Width = 128
End With
End With
End With
|
|
45
|
How can I display a checkbox while my node hosts an ActiveX inside
With AxSurface1
With .Elements
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = """check"":18,""client"""
.Object.Caption = "command"
.ShowCheckBox = True
.Height = 48
.Width = 128
End With
End With
End With
|
|
44
|
Is it possible to display a caption while the element hosts an ActiveX control
With AxSurface1
With .Elements
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = "18;""caption""/""client"""
.Object.Caption = "command"
.Caption = "Forms.CommandButton"
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopCenter
.Height = 48
.Width = 128
End With
End With
End With
|
|
43
|
I host an ActiveX control but it does not cover the whole element. What can be done
With AxSurface1
With .Elements
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = """client"""
.Object.Caption = "command"
.Height = 32
.Width = 128
End With
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = """client"""
.Object.Caption = "command"
.Height = 32
.Width = 128
End With
End With
End With
|
|
42
|
How can I host my ActiveX to the surface (method 2)
With AxSurface1
With .Elements
With .InsertControl("Forms.CommandButton.1")
.ElementFormat = """client"""
.Object.Caption = "command"
.Height = 32
.Width = 128
End With
End With
End With
|
|
41
|
How can I host my ActiveX to the surface (method 1)
With AxSurface1
With .Elements
With .Add("ActiveX")
.Type = EXSURFACELib.ElementHostTypeEnum.exElementHostControl
.ElementFormat = """client"""
.Control = "Forms.CommandButton.1"
.Object.Caption = "command"
.Height = 32
.Width = 128
End With
End With
End With
|
|
40
|
How can I define the elements with a solid color on the background
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBorderColor,-1)
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementStatusColor,-1)
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBackColor,255)
With .Elements
.Add("Node A")
.Add("Node B",96,24)
End With
End With
|
|
39
|
Can I display the status to a different part of the element
With AxSurface1
.Elements.Add("Node").StatusAlign = EXSURFACELib.EdgeAlignmentEnum.exAlignBottom
End With
|
|
38
|
How can I remove or hide the status part of the event
' AddElement event - A new element has been added to the surface.
Private Sub AxSurface1_AddElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_AddElementEvent) Handles AxSurface1.AddElement
' Element.StatusSize = 0
End Sub
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementStatusColor,-1)
With .Elements
.Add("Node A")
.Add("Node B",96,24)
End With
End With
|
|
37
|
How can I change the visual appearance of the border for all elements
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBorderColor,16777216)
With .Elements
.Add("Element+A")
.Add("Element+B",96,24)
End With
End With
|
|
36
|
How can I change the color of the border for all elements
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBorderColor,65280)
With .Elements
.Add("Element+A")
.Add("Element+B",96,24)
End With
End With
|
|
35
|
How can I remove the border for all elements
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBorderColor,-1)
With .Elements
.Add("Element+A")
.Add("Element+B",96,24)
End With
End With
|
|
34
|
How do I change the visual appearance the glpyh that shows when the element is added as a child
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.VisualAppearance.Add(2,"c:\exontrol\images\pushed.ebn")
.set_Background(EXSURFACELib.BackgroundPartEnum.exHoverInsertObject,16777216)
.set_Background(EXSURFACELib.BackgroundPartEnum.exHoverInsertObjectGlyph,33554432)
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
End With
|
|
33
|
Is it possible to change the color for the glpyh that shows when the element is added as a child
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exHoverInsertObject,255)
.set_Background(EXSURFACELib.BackgroundPartEnum.exHoverInsertObjectGlyph,255)
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
End With
|
|
32
|
How can I change the color to show a valid link
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exLinkObjectsValidColor,65280)
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
End With
|
|
31
|
How can I change the color to show an invalid link
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exLinkObjectsInvalidColor,65280)
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
End With
|
|
30
|
How can I disable adding the elements as child of other nodes
With AxSurface1
.AllowInsertObject = False
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
End With
|
|
29
|
How can I prevent moving the outgoing /descendents elements when moving an element
With AxSurface1
.ShowLinksType = EXSURFACELib.ShowLinkTypeEnum.exLinkStraight Or EXSURFACELib.ShowLinkTypeEnum.exLinkDirect
.AllowMoveDescendents = False
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
End With
End With
|
|
28
|
How can I add programatically a link
With AxSurface1
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
With .Links
.Add(AxSurface1.Elements.Item(1),AxSurface1.Elements.Item(2))
End With
End With
|
|
27
|
How do I prevent adding a link between elements
With AxSurface1
.AllowLinkObjects = EXSURFACELib.AllowKeysEnum.exDisallow
With .Elements
.Add("Element <sha ;;0>A")
.Add("Element <sha ;;0>B",96,24)
End With
End With
|
|
26
|
How can I hide the 100% button ( zoom ) on the control's toolbar
With AxSurface1
.ToolBarFormat = "-1,100"
End With
|
|
25
|
Is it possible to hide the Home button on the control's toolbar
With AxSurface1
.ToolBarFormat = "-1,101"
End With
|
|
24
|
How can I hide the grid lines, including the axis
With AxSurface1
.ShowGridLines = False
.AxisStyle = EXSURFACELib.LinesStyleEnum.exNoLines
End With
|
|
23
|
How can I hide the grid lines
With AxSurface1
.ShowGridLines = False
End With
|
|
22
|
How can I clear the images shown on the control's toolbar
With AxSurface1
.ToolBarReplaceIcon(0,-1)
.ToolBarRefresh()
End With
|
|
21
|
How can I replace the default icons shown on the control's toolbar
With AxSurface1
.ToolBarReplaceIcon(0,-1)
.ToolBarImages("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
End With
|
|
20
|
How can I replace the default icons shown on the control's toolbar
With AxSurface1
.ToolBarImages("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
.set_ToolBarCaption(100,"<img>3</img> aka1")
End With
|
|
19
|
How can I add an anchor element to the control's toolbar
' ToolBarAnchorClick event - Occurs when an anchor element is clicked, on the control's toolbar.
Private Sub AxSurface1_ToolBarAnchorClick(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_ToolBarAnchorClickEvent) Handles AxSurface1.ToolBarAnchorClick
With AxSurface1
Debug.Print( e.anchorID )
End With
End Sub
With AxSurface1
.ToolBarFormat = "-1,100,101,|,102"
.set_ToolBarCaption(102,"<a a1>anchor</a>")
End With
|
|
18
|
How can I add a button/image to the control's toolbar
' ToolBarClick event - Occurs when the user clicks a button in the toolbar.
Private Sub AxSurface1_ToolBarClick(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_ToolBarClickEvent) Handles AxSurface1.ToolBarClick
With AxSurface1
Debug.Print( e.iD )
End With
End Sub
With AxSurface1
.ToolBarImages("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
.ToolBarFormat = "-1,100,101,102"
.set_ToolBarCaption(102,"<img>3</img> new")
End With
|
|
17
|
How can I add a button to the control's toolbar
' ToolBarClick event - Occurs when the user clicks a button in the toolbar.
Private Sub AxSurface1_ToolBarClick(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_ToolBarClickEvent) Handles AxSurface1.ToolBarClick
With AxSurface1
Debug.Print( e.iD )
End With
End Sub
With AxSurface1
.ToolBarFormat = "-1,100,101,102"
.set_ToolBarCaption(102,"<sha ;;0>new")
End With
|
|
16
|
How can I hide the control's toolbar
With AxSurface1
.ToolBarVisible = False
End With
|
|
15
|
How can I prevent selecting the elements
With AxSurface1
.AllowSelectObject = EXSURFACELib.AllowKeysEnum.exDisallow
.AllowSelectObjectRect = EXSURFACELib.AllowKeysEnum.exDisallow
.AllowToggleSelectKey = EXSURFACELib.AllowKeysEnum.exDisallow
.Elements.Add("element")
End With
|
|
14
|
How can I show the selected elements the same as the control has the focus
With AxSurface1
.HideSel = False
.SelectObjectColorInactive = .SelectObjectColor
.SelectObjectTextColorInactive = .SelectObjectTextColor
.Elements.Add("element").Selected = True
End With
|
|
13
|
How can I show the selected elements with a different border
With AxSurface1
.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
.HideSel = False
.SelectObjectStyle = EXSURFACELib.LinesStyleEnum.exLinesSolid
.GetOcx().SelectObjectColor = &H1000000
.SelectObjectTextColor = RGB(0,0,0)
.SelectObjectColorInactive = .SelectObjectColor
.SelectObjectTextColorInactive = .SelectObjectTextColor
.Elements.Add("element").Selected = True
End With
|
|
12
|
How can I show the selected elements with a different background color
With AxSurface1
.HideSel = False
.SelectObjectStyle = EXSURFACELib.LinesStyleEnum.exNoLines
.SelectObjectColor = RGB(255,0,0)
.SelectObjectTextColor = RGB(255,255,255)
.SelectObjectColorInactive = .SelectObjectColor
.SelectObjectTextColorInactive = .SelectObjectTextColor
.Elements.Add("element").Selected = True
End With
|
|
11
|
Is it possible to add an inner control on the surface
' OleEvent event - Occurs once an inside control fires an event.
Private Sub AxSurface1_OleEvent(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_OleEventEvent) Handles AxSurface1.OleEvent
With AxSurface1
Debug.Print( e.ev )
End With
End Sub
With AxSurface1
With .Elements
With .Add("activex hosting")
.Type = EXSURFACELib.ElementHostTypeEnum.exElementHostControl
.Control = "Forms.CommandButton.1"
.Caption = "Command Button"
.Height = 64
.Width = 128
.ElementFormat = "14;""caption""/""client"""
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopCenter
End With
End With
End With
|
|
10
|
How can I make the control read-only
' LayoutStartChanging event - Occurs when the control's layout is about to be changed.
Private Sub AxSurface1_LayoutStartChanging(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_LayoutStartChangingEvent) Handles AxSurface1.LayoutStartChanging
With AxSurface1
Debug.Print( e.operation )
.CancelLayoutChanging()
End With
End Sub
With AxSurface1
With .Elements
.Add("new element")
End With
End With
|
|
9
|
How can I handle clicking a picture on the element
' HandCursorClick event - The uses clicks a part of the element that shows the had cursor.
Private Sub AxSurface1_HandCursorClick(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_HandCursorClickEvent) Handles AxSurface1.HandCursorClick
With AxSurface1
Debug.Print( e.key )
End With
End Sub
With AxSurface1
.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
With .Elements
With .Add("new element")
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopRight
.PicturesAlign = EXSURFACELib.ContentAlignmentEnum.exTopLeft
.ShowHandCursorOn = EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorAnchorAll Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorPictures Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorIcon Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorPicture
.Pictures = "0,1,2"
End With
End With
End With
|
|
8
|
How can I show the hand cursor when user hovers the element's image
' HandCursorClick event - The uses clicks a part of the element that shows the had cursor.
Private Sub AxSurface1_HandCursorClick(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_HandCursorClickEvent) Handles AxSurface1.HandCursorClick
With AxSurface1
Debug.Print( e.key )
End With
End Sub
With AxSurface1
.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTq" & _
"lVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m" & _
"0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/y" & _
"NAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
With .Elements
With .Add("new element")
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopRight
.PicturesAlign = EXSURFACELib.ContentAlignmentEnum.exTopLeft
.ShowHandCursorOn = EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorAnchorAll Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorPictures Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorIcon Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorPicture
.Pictures = "0,1,2"
End With
End With
End With
|
|
7
|
How can I show the hand cursor when user hovers the element's checkbox
With AxSurface1
With .Elements
With .Add("new element")
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopRight
.CheckBoxAlign = EXSURFACELib.ContentAlignmentEnum.exTopLeft
.ShowCheckBox = True
.ShowHandCursorOn = EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorAnchorAll Or EXSURFACELib.ShowHandCursorOnEnum.exShowHandCursorCheck
End With
End With
End With
|
|
6
|
How can I remove the status part for all elements
' AddElement event - A new element has been added to the surface.
Private Sub AxSurface1_AddElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_AddElementEvent) Handles AxSurface1.AddElement
' Element.StatusSize = 0
End Sub
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementStatusColor,-1)
.Elements.Add("new element")
End With
|
|
5
|
How can I remove the border for all elements
With AxSurface1
.set_Background(EXSURFACELib.BackgroundPartEnum.exElementBorderColor,-1)
.Elements.Add("new element")
End With
|
|
4
|
How do I edit the element's caption once the user creates the element
' CreateElement event - The user creates at runtime a new element.
Private Sub AxSurface1_CreateElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_CreateElementEvent) Handles AxSurface1.CreateElement
' Element.Edit(0)
' Element.AutoSize = True
End Sub
|
|
3
|
How can I align the element's checkbox next to the text
With AxSurface1
.BeginUpdate()
With .Elements
With .Add("text")
.ShowCheckBox = True
.CaptionAlign = EXSURFACELib.ContentAlignmentEnum.exTopRight
.CheckBoxAlign = EXSURFACELib.ContentAlignmentEnum.exTopLeft
End With
End With
.EndUpdate()
End With
|
|
2
|
How can I assign a check-box to all elements
' AddElement event - A new element has been added to the surface.
Private Sub AxSurface1_AddElement(ByVal sender As System.Object, ByVal e As AxEXSURFACELib._ISurfaceEvents_AddElementEvent) Handles AxSurface1.AddElement
' Element.ShowCheckBox = True
End Sub
With AxSurface1
.BeginUpdate()
With .Elements
.Add("",-24,-24)
.Add("").Checked = EXSURFACELib.CheckStateEnum.exChecked
End With
.Home()
.EndUpdate()
End With
|
|
1
|
How do I change the control's background color
With AxSurface1
.BackColor = RGB(240,240,240)
End With
|